For hi-speed automation of sliding gates weighing up to 1200 kg, for residential and industrial applications.

24 Vdc electromechanical gear motor.

The fastest:

ideal for industrial applications, designed for intensive use.

Rapid manoeuvres, with opening and closing speed up to 70 cm/s.

For instance, opening a 7 m gate takes around 18 seconds with RUN400HS.

User-friendly:

thanks to the Nice BlueBUS technology, the control unit can be connected to up to seven couples of photocells, control, security and signalling devices, using two wires only.

Practical:

the control unit and PS524 battery charger (to which two B12-B batteries should be added) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced:

the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out.
A master/slave selection automatically synchronises two motors.
This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent:

thanks to the obstacle detection system and automatic programming of the working times.
Self-diagnosis by means of a flashing light. 8 programming levels.

Safe:

acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.

Sturdy:

base and release in pressure die cast with easy to open handle.

Very quiet:

gear motor on bearings.

Power supply (Vac):	230
Absorption (A):	2
Power (W):	415
Speed (m/s):	0.37
Force (Nm):	790
Work cycle (cycles/hour):	60
Protection level (IP):	44
Working temp. (°C):	-20 ÷ +50
Dimensions (mm):	400x255x387 h
Weight (kg):	24.5