RB500HS

SKU: 7868 Category:

For hi-speed automation of sliding gates weighing up to 500 kg or up to 8 m long, for residential and industrial applications.

24 Vdc electromechanical gear motor.

Ideal for intensive use, with opening and closing speed up to 44 cm/s.

For instance, opening a 4 m gate takes around 9 seconds.

User-friendly:

thanks to the Nice BlueBUS technology, the control unit can be connected to up to seven couples of photocells, control, security and signalling devices, using two wires only.

Practical:

the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.

Advanced:

the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out.
A master/slave selection automatically synchronises two motors.
This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent:

thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe:

acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.

Sturdy:

base and release in pressure die cast with easy to open handle.

Very quiet:

gear motor on bearings.

Power supply (Vac): 230
Absorption (A): 2.2
Power (W): 450
Speed (m/s): 0.44
Force (Nm): 360
Work cycle (cycles/hour): 20
Protection level (IP): 44
Working temp. (°C): -20 ÷ +50
Dimensions (mm): 330x195x277 h
Weight (kg): 11
Scroll to Top